During the setup and installation, should you have any problems that are not covered in this Quick Start Up Installation Guide, please refer to the User’s manual that came with your printer. The error numbers are displayed in the following format: AMT Datasouth does not provide printer drivers for Documax series printers, since these printers do not contain a native AMT Datasouth command language. You will have to set any features that you have changed from factory. A cheap and charming color laser printer A cheap and charming color laser printer by Dan Ackerman. This error could be caused by a dirty, blocked or faulty left margin carriage home sensor. Verify that left form edge is in line with alignment mark.

Uploader: Vugor
Date Added: 6 October 2016
File Size: 39.70 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 71703
Price: Free* [*Free Regsitration Required]

The settings should remain in memory even if you turn the printer off. Close the access cover.

Username Password Remember Me. Turn on the printer power.

Datasouth Documax Printer Series

The printhead might be worn down. Manually rotate the Form Thickness Adjustment Knob counterclockwise so that the printhead is the maximum distance away from the platen. Clean docunax rails with Denatured Alcohol Only.

Yours may be different, but should be in that neighborhood.

There is no way to set the printer to ignore these software settings. Ensure the ribbon and guide are factory approved and are in the correct position and not twisted.


AMT Datasouth Documax A3300 – printer – monochrome – dot-matrix Series

You would need to purchase the firmware kit, part number You will docmax to call for service. If you are asking about the mylar shield on the plastic ribbon guide which fits over the printhead, it must stay on the ribbon guide.

Printers by Rick Broida Oct 16, Press enter at that point to save the current settings as the default for that profile.

The sensor is on the left side of the printer, check it for dirt or for paper blocking it. Load paper into the printer Place the printer online Press and release the Profile key Press and release the Park key Open the keypad door and use the next menu key to scroll to menu The printer will automatically go off line when the paper supply is depleted.

AMT Datasouth Documax N3302 – printer – monochrome – dot-matrix Series

Laptops by Dan Ackerman Nov 26, This kit is available from our parts dept atoption 1. Why does my Documax Printer lose form alignment after using Tear off button? Printers by Rick Broida Oct 16, The printer will indicate a paper out condition if paper needs to be reloaded.

Turn off the printer power. When either feature is enabled the printhead of the printer passes 4 times to complete the character s. Bose, Sony, Sennheiser and Jaybird Here’s a selection of the best headphone shopping values this holiday season.


These drivers all can be found on the Windows Installation disks. Forms should be positioned to feed straight, if not, reposition forms. Paper that has not reached the platen may be removed by openeing the tractors and pulling the paper straight down. Clear the obstruction and ensure that pritner carriage can move freely. What can be done to prevent this?

Datasouth Documax A Dot Matrix Printer ()

To replace the ribbon, open the top of the printer, move the dial on the outside right side of the printer to the front of the printer max printhead gap and remove the ribbon.

Please remove the ribbon cartridge and try to power up the printer. Paper must be loaded prior to performing printer diagnostics. Printer Weighs Approximately 45 lbs. This will doucmax your ram to k.